Not every clear PVC tube is made for fuel, but the two in our Oil Products range are listed for it. Both product pages describe them as mono-extruded PVC tube for the flow of petrol, diesel and water, but they do not give a chemical-resistance rating. This article covers what the pages do state, how the two listings differ and how to order the right one.

What the clear PVC fuel tube is rated for

Both listings, PVC tube for petroleum products and PVC tube for Oil/Fuel products, give the same specification:

  • Applications: a flexible, lightweight, mono-extruded PVC tube for the flow of petrol, diesel and water.
  • Tube and cover: flexible, transparent mono-extruded PVC that resists atmospheric factors.
  • Reinforcement: it can be textile reinforced, or you can have it without reinforcement.
  • Temperature: -25°C to +60°C.

That is the full rating. The pages do not give a working pressure, a burst pressure or a standard. If the tube will be used under pressure, or your job depends on a pressure figure, ask us before you order rather than assuming one.

Why buy clear tube for fuel

The tube is transparent, so you can see what is flowing through it.

The tube is also light and flexible, which makes short runs easy to route. The pages describe the tube and cover as flexible, transparent mono-extruded PVC.

The two listings, and choosing a bore

Between them, the two listings cover inner diameters from 3 mm to 18 mm:

  • PVC tube for petroleum products: 3, 4, 5, 6, 7, 8, 10, 14, 16 and 18 mm bore.
  • PVC tube for Oil/Fuel products: 5, 6, 8, 10, 12 and 14 mm bore. This is the listing to use if you need 12 mm.

Both are sold in 1 m and 25 m lengths. If you need a different length, contact us before you order. Choose by the inner diameter of the tube, which needs to match the outside diameter of the spigot or barb it pushes onto. Measure the old tube's bore, or the fitting itself, rather than guessing from the outside of the old line; our guide on how to measure hose bore shows how. If you are between two sizes, the snugger fit is usually the safer choice for a fuel joint, and a clamp sized to the tube's outside diameter should go on every connection.

Reinforced or unreinforced

According to the pages, the tube can be textile reinforced or supplied without reinforcement. The size selector on the product pages shows bore and length only, so tell us which version you need when you order, or ask before you buy if you are not sure which suits your job.

Where the limits are

The main limit is temperature. At +60°C maximum, this tube shouldn't run close to hot engine parts, exhausts or anything that heats the fuel above that. Keep it inside -25°C to +60°C along its whole route, not only at the ends. We also stock rubber fuel hose, such as SAE J30 R6 and DIN 73379 B, if your job needs something other than PVC tube.

Fitting and checking a PVC fuel line

This advice applies to any fuel line. Cut the tube square with a sharp blade. Push it fully over the barb and fit a clamp sized to the tube's outside diameter at every joint. Route the line so it does not kink or rub on sharp edges, and support long runs so the tube doesn't sag. Check the line regularly for cracks, hardening, cloudiness or weeping at the joints, and replace it if you find any. Clear tube makes the inside easy to check, but the outside and the joints still need looking at.

How to order or ask

To order, choose the listing that has your bore, PVC tube for petroleum products for 3, 4, 5, 6, 7, 8, 10, 14, 16 or 18 mm, or PVC tube for Oil/Fuel products for 12 mm. Then choose 1 m or 25 m; the price for each option is shown on the product page. If you are not sure the tube suits your job, send us three things: the bore you need, the length, and what will go through it, including its temperature and whether the line is under pressure. Also tell us whether you want it reinforced or unreinforced. If PVC is not the right choice, we will point you to a rubber fuel hose instead. Cut-to-length tube is prepared to order and cannot be returned unless it is faulty, so check the size before you order.